Industrial Machine Vision Board, WF-RK3566, AndroidSBC, Zagreb

TL;DR: Industrial Machine Vision Board

Zagreb, Croatia - September 10, 2026. Wanlin Longgang confirmed lot 364 this week: 23,415 WF-RK3566 boards for Zagreb, Croatia, released with the per-lot certification pack and a unit-level burn-in record.

AndroidSBC export compliance briefing covering the WF-Series custom board family serving Zagreb, Croatia. The line-up runs from the cost-optimised Allwinner A133 commercial display board through to the Rockchip RK3588 eight-core 8K video wall board, with the Allwinner T527 octa-core industrial board and the Rockchip RK3568, RK3566, and RK3288 boards filling the industrial, vision, and POS tiers. AndroidSBC ships all nine from the Longgang source factory in Shenzhen, with the SOM variants (WF-A133S, WF-RK3588S) aimed at Zagreb and Croatia buyers who need their own carrier board.

About AndroidSBC and the Rockchip RK3566 Board Family

Wanlin Manufacturing Group is a Shenzhen board builder that has worked on Allwinner and Rockchip silicon for more than ten years, and AndroidSBC is the name it sells under overseas. The WF-Series is the current line: nine boards spanning Allwinner A133, H618, and T527 and Rockchip RK3588, RK3568, RK3566, and RK3288, with two SOM modules for customers who bring their own carrier. Production, test, and packing sit in one Longgang building, which is why the group can issue a per-lot Technical File instead of a generic declaration. Buyers in Zagreb and Croatia usually arrive for one of three reasons: platform breadth, OEM branding capacity, or a supplier willing to carry the certification obligation.

WF-RK3566 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3566 (Machine Vision and HMI Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Croatia importers sourcing the WF-Series, the 2GB + 16GB (WF-RK3566-A) variant is the typical configuration for the machine vision and human-machine interface use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Machine Vision and HMI Board for Croatia Buyers

For Croatia procurement teams, the first surprise on the machine vision and hmi board line is rarely technical. It is that the sample arrives on time and the production lot does not, because the Rockchip RK3566 allocation cannot be conjured from broker stock when a 23,415-unit order is confirmed. The second risk sits in the firmware image. Boards that pass a bench boot can still fail the certified stack the buyer's channel requires, and that gap usually appears during inbound inspection rather than before shipment.

The third exposure is the file behind the mark. A CE stamp without a dated test report and a Declaration of Conformity is a marking without substance, and the moment it matters is the moment a Croatia customs officer asks for the underlying document. AndroidSBC answers this by burning the certified software stack at the Longgang plant on every lot, with a per-unit QR that traces back to the burn-in record. For Zagreb importers serving hospitality, retail, healthcare, education, or industrial verticals, the nine WF-Series models cover the machine vision, human-machine interface, smart camera, industrial monitoring, edge AI development, digital signage, education terminal, and IoT gateway applications directly, with three memory configurations per board.

Compliance for Croatia is handled at the factory rather than after arrival. In Croatia the market is small enough that most volume moves through distributors who also cover Slovenia and Serbia from one warehouse. The Longgang export desk builds the destination-market file for CE marking with HAKOM radio interface notification administered by HAKOM and issues it alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the shipment booked into Port of Rijeka on the Rijeka to Piraeus relay.

Competitive Comparison: WF-RK3566 vs Competing RK3566 Boards

The comparison set for the machine vision and hmi board socket splits three ways: legacy SoC boards priced low and uncertified, Cortex-A55 boards that carry certification but cap decode early, and 64-bit boards with both. The WF-RK3566 sits in the third group, differentiated by Rockchip RK3566, by display stability under a continuous load, and by the factory-side certified image burn.

• vs RK3288 Cortex-A17 boards: the RK3566 Cortex-A55 1.8GHz adds a 1 TOPS NPU the older platform never had.
• vs RK3568 boards: the RK3566 trades the second Ethernet port for a lower BOM on camera and HMI builds.
• vs Raspberry Pi 4 form factor SBCs: the RK3566 adds onboard eMMC, MIPI CSI, and an industrial temperature envelope.
• vs USB-camera-only boards: the RK3566 native MIPI CSI path removes the USB bandwidth ceiling from the vision pipeline.

Global Machine Vision and Embedded HMI Market Trends

The Machine Vision and Embedded HMI market is the frame that decides how Croatia importers time their machine vision and hmi board orders. The figure most Croatia buyers quote when they argue about allocation is the Android TV Box segment, which Global Growth Insights sizes at USD 12.45 billion in 2025 with a 30.49 percent CAGR through 2035 (Global Growth Insights, Android TV Box Market Report, 2025-2035); it is the public proxy for Android-on-silicon demand rather than a forecast for this board category. For Zagreb, three buying patterns are shaping the WF-Series order book:

• Machine vision: WF-RK3566 runs the vision model on the NPU against the MIPI CSI frame stream.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3566 board carries that headroom without a board change.
• Smart camera: WF-RK3566 encodes the 4K@60fps stream next to the inference loop.

The Machine Vision and Embedded HMI outlook in Croatia is being read less as a demand question and more as a supply-chain question, because demand has outrun reliable allocation.

In all three cases, Zagreb buyers are converting spot quotes into blanket orders with a monthly lot release, because a programme that has to hold a twelve-month shipping window cannot tolerate a mid-year allocation break.

Partner Success Story: Hanul Media Systems in Zagreb, Croatia

Hanul Media Systems, a broadcast systems integrator serving the Croatia market, deployed 6,300 units of the WF-RK3588 video wall controller board for a control room programme. The rollout covered the machine vision, smart camera, and digital signage workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 6,300 units of the WF-RK3588 video wall controller board for a control room programme
• Region: Zagreb, Croatia
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Nansha with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Rijeka via the Rijeka to Piraeus relay

"Four independent displays and 8K decode on one board is what let us drop the add-in card entirely. The control room footprint shrank and the bill of materials followed it down."

- Park Ji-hoon, Technical Director

Field Report: container yard at Yantian, where 23,415 WF-RK3566 boards from the Wanlin export base are being loaded onto containerised pallets with the customs declaration naming the Longgang source factory

Reporter Cao Wen, on the ground in Zagreb, Croatia. The yard crew handled the order on flat pallets wrapped in anti-static film, with every carton barcode-traced back to the burn-in record. The customs broker attached a single declaration naming the Wanlin Longgang source factory as the place of origin, and the container was sealed before the afternoon cut-off.

A carton-level audit matched 40 sampled serials against the burn-in database with no mismatch.

The inspection confirmed three things on the spot: the WF-RK3566 units hold the burn-in with a yield above 99.51 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with HAKOM radio interface notification administered by HAKOM, cleared for entry at Port of Rijeka on the Rijeka to Piraeus relay. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that Croatia importers can hand straight to their customs broker.

Filed by Cao Wen, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3566 Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3566 (Machine Vision and HMI Board) as the lead SKU for Zagreb and Croatia programmes:

• Machine vision: WF-RK3566 runs the vision model on the NPU against the MIPI CSI frame stream.
• Human-machine interface: WF-RK3566 drives the HMI panel over eDP with the 40-pin GPIO header for the button matrix.
• Smart camera: WF-RK3566 encodes the 4K@60fps stream next to the inference loop.
• Industrial monitoring: WF-RK3566 holds the wide-temperature envelope on the fanless board.
• Edge AI development: WF-RK3566 exposes the NPU toolchain through the Android 11 and Linux BSP.
• Digital signage: WF-RK3566 plays the 4K loop over HDMI 2.0.
• Education terminal: WF-RK3566 runs the Android 11 classroom image on the Pi form factor board.
• IoT gateway: WF-RK3566 pairs WiFi 6 with the Gigabit uplink.

Partnership Models for Zagreb Buyers

For Zagreb importers and brand owners, the WF-RK3566 and the rest of the WF-Series are available under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever tier a Croatia partner picks, the goods leave Longgang with one documentation pack covering CE, FCC, UKCA, RoHS, and REACH. The usual first order on the WF-RK3566 is the 2GB + 16GB (WF-RK3566-A) configuration at MOQ 5,000 units, four weeks for samples and six weeks for mass production.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: It depends on the platform, and AndroidSBC is explicit about the split. The WF-H618 carries the ATV 12 GMS build with Widevine L1 and Dolby Audio pre-burned at the factory. The WF-A133, WF-T527, and the Rockchip boards ship with an AOSP or Linux image by default, and a GMS build can be prepared for ODM partners who need Play Services in the field. Certification scope is agreed per project rather than assumed.

What is the difference between the nine WF-Series models?

Answer: WF-A133 is the Allwinner A133 commercial display and advertising board. WF-H618 is the Allwinner H618 OTT TV box and Android TV board. WF-T527 is the Allwinner T527 octa-core industrial control and edge AI board. WF-RK3588 is the Rockchip RK3588 8K video wall and AI computing board. WF-RK3568 is the Rockchip RK3568 industrial edge board. WF-RK3566 is the Rockchip RK3566 machine vision and HMI board. WF-RK3288 is the Rockchip RK3288 POS and signage board. WF-A133S is an Allwinner A133 SOM module for custom carrier work. WF-RK3588S is a Rockchip RK3588 SMARC 2.2 module for the same purpose.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for Croatia?

Answer: Yes, and the file travels with the goods rather than behind them. The pack covers CE, FCC Part 15, UKCA, RoHS 2.0, and REACH with test reports dated within the prior year. AndroidSBC will also advise on any Croatia-specific addition during quotation, which is the point at which the answer is still useful.

What are the MOQ and lead time for a first order?

Answer: The entry point is 5,000 units per shipment, four weeks for samples and six weeks for production. A twelve-month framework agreement released monthly will bring the per-lot MOQ down, and AndroidSBC will accept a mixed order that draws several WF-Series boards against a single contract.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Custom ROM and custom Linux work is part of the ODM tier. That covers proprietary Android services, a locked-down launcher, Yocto or Debian or Buildroot images, and BSP ports for custom carriers. Source access is released under NDA, and the Longgang engineering desk carries the port so the partner is not left with an unmodified vendor BSP.

What about software updates and long-term support?

Answer: Wanlin commits to a minimum seven-year supply window across the WF-Series. Security patches are back-ported across the Android and Linux firmware tracks for as long as the board is in production, and AndroidSBC provides OTA update infrastructure for partners who need to push firmware to field-deployed units. For POS and industrial programmes, the support commitment is written into the framework agreement rather than left as an understanding.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU, and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-RK3566 unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit burn-in record means the failure report usually carries a root cause alongside the replacement.

Contact AndroidSBC: Start Your WF-RK3566 Sourcing Conversation

The AndroidSBC export desk handles all WF-Series enquiries from Zagreb and Croatia. Direct factory contact for the machine vision and hmi board is available through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with HAKOM radio interface notification for Croatia, administered by HAKOM, entering at Port of Rijeka on the Rijeka to Piraeus relay
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To start an OEM or ODM review, send the target volume, the certification scope you need, and your preferred Incoterm. The export desk replies with a per-lot quotation and the MOQ matrix across the nine WF-Series boards within two business days.