RK3588 Custom SMARC Module, WF-C3588-I1, AndroidSBC, Zagreb

TL;DR: RK3588 Custom SMARC Module

SHENZHEN, China, September 12, 2026 - The WF-C3588-I1 board line at Wanlin Longgang closed lot 151 this week. 15,150 units are now booked for Zagreb, Croatia, shipped FOB with the full certification file attached.

AndroidSBC field deployment report from active Rockchip RK3588 custom board projects serving Zagreb, Croatia. The line spans custom Android motherboards at the entry variant through core-board-plus-carrier work at the SOM end, all on the same Rockchip RK3588 silicon with 6 TOPS NPU, 8K H.265 decode and up to 32GB of LPDDR5. AndroidSBC ships the full range from the Wanlin Longgang plant, and Zagreb buyers can mix custom variants inside a single framework agreement rather than opening a new supplier file for each product line.

About AndroidSBC and the Rockchip RK3588 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group. The group runs SMT, test and packing under one roof at Longgang in Shenzhen, and it has built custom boards on Rockchip silicon for overseas OEM customers for over ten years. The WF-C3588 line-up covers nine custom categories on the same Rockchip RK3588 octa-core 8nm silicon with 6 TOPS NPU: custom Android motherboards, custom industrial boards, core board and SOM carrier design, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. Buyers in Zagreb and Croatia can source any of the nine custom variants from one factory with one set of export documents.

WF-C3588-I1 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-I1 (Custom Industrial Motherboard for Fanless and Wide-Temperature Control) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Croatia importers sourcing the WF-Series, the 8GB + 32GB (WF-C3588-I1-B) variant is the typical configuration for the custom industrial control and HMI programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Industrial Motherboard for Fanless and Wide-Temperature Control for Croatia Buyers

Buyers in Zagreb who have sourced a custom industrial motherboard for fanless and wide-temperature control for a few seasons tend to separate two questions: can the factory hold the price, and can it hold the allocation. The second one is harder. The Rockchip RK3588 is allocated at wafer level, and a 15,150-unit order placed against trader stock is the order most likely to slip a quarter without anyone warning the buyer. The second issue is firmware, not hardware. Vendors promise the full certified software stack and then ship a bare AOSP image, and the failure only surfaces at the warehouse when the unit is powered on against the customer's app.

The third exposure is paperwork. Factories that stamp marks without holding the underlying test reports leave the importer to produce a Technical File after the fact, which is exactly when the container is sitting in a bonded yard. The answer AndroidSBC applies is to close the gap at the source. Custom variant assembled on the Longgang line, certified image burned, burn-in record traceable per unit, certification file issued with the lot. The nine WF-C3588 variants span industrial HMIs, panel PCs, PLC upgrades, SCADA nodes, DIN-rail controllers, factory automation, data acquisition, IIoT gateways, and machine control and each carries three memory configurations, which keeps most Croatia requirements on a standard custom SKU rather than a from-scratch run.

Buyers in Croatia tend to ask about the local mark before they ask about price. In Croatia the market is small enough that most volume moves through distributors who also cover Slovenia and Serbia from one warehouse. AndroidSBC handles that by preparing the destination-market file covering CE marking with HAKOM radio interface notification administered by HAKOM alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the lot routed through Port of Rijeka on the Rijeka to Piraeus relay.

Competitive Comparison: WF-C3588-I1 vs Competing RK3588 Boards

Competing boards in the custom industrial motherboard for fanless and wide-temperature control category sort into three camps: cheap catalogue boards with no customization, re-badge imports with a sticker but no engineering file, and source-factory custom boards with the BSP, the certification and the test bench in one building. The WF-C3588-I1 is in the last camp, and its edge is Rockchip RK3588 plus a factory that will route the I/O the project actually needs.

• vs commercial boards in industrial dress: the WF-C3588-I1 is designed to -40C to 85C from the schematic up, not a consumer board with a bigger heatsink.
• vs local integrator bundles: the carrier design, the BSP port and the DIN-rail chassis all come from one Longgang engineering desk, so responsibility never splits across vendors.
• vs legacy PLC upgrade paths: the 6 TOPS NPU adds on-device vision and predictive maintenance to a PLC retrofit without a separate AI box.
• vs trading-company boards: the per-lot Technical File, the aging record and the EMC pre-compliance bench all live inside the source factory.

Global Custom Industrial Motherboard and Panel PC Market Trends

The Custom Industrial Motherboard and Panel PC curve is what Croatia importers read before committing to a custom industrial motherboard for fanless and wide-temperature control programme. The number they quote is the Edge AI hardware segment at USD 26.9 billion in 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, Edge AI Hardware Market Report, 2025-2030), which serves as the closest public proxy for the silicon demand behind custom RK3588 boards. For Zagreb that resolves into three demand patterns across the WF-C3588 order book:

• Industrial HMI panel: a machine builder replaces an aging Windows panel with a fanless HMI running a Yocto image and a custom UI.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-I1 board carries that headroom without a board change.
• SCADA edge node: a utility deploys DIN-rail controllers that aggregate substation data and push it over dual Gigabit links.

Channel research on the Custom Industrial Motherboard and Panel PC segment keeps landing on the same point: the constraint is allocation, and allocation is held by factories rather than traders.

Across those three segments, Zagreb procurement has been shifting from spot quotes to framework agreements with a one-lot-per-month cadence, particularly where a custom Android, industrial, signage or robotics programme needs a twelve-month shipping window.

Partner Success Story: Trident Vending in Zagreb, Croatia

Trident Vending, a smart vending operator serving the Croatia market, deployed 5,400 custom WF-C3588-K4 vending machine boards for an unattended retail estate. The rollout covered the industrial hmi panel, scada edge node, and factory automation cell workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 5,400 custom WF-C3588-K4 vending machine boards for an unattended retail estate
• Region: Zagreb, Croatia
• Models used: WF-C3588-I1 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Shekou with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Rijeka via the Rijeka to Piraeus relay

"The shelf-camera stock check on the NPU cut our route visits by a third, and the multi-serial profile drives the coin and note units without adapter boxes. When a board does fail, the burn-in barcode gets us a root-cause note with the replacement."

- Marco Bellini, IT Infrastructure Lead

Field Report: pre-shipment inspection bench at the Wanlin Longgang test facility, with the WF-C3588-I1 board holding a fanless wide-temperature industrial loop workload for the 15,150-unit order destined for Zagreb

Reporter Jiang Bo, on the ground in Zagreb, Croatia. Engineers fed the WF-C3588-I1 board a reference stream and watched for throughput drops, dropped frames, and colour banding. Pass criteria required zero dropped frames across the full run plus a glitch-free secondary output for the entire 30-minute window. Nothing on the bench needed a retest.

The plant maintenance log showed no unscheduled stoppage on the Rockchip RK3588 line during the lot, which the production manager attributed to the AOI pass added last quarter.

The inspection confirmed three things on the spot: the WF-C3588-I1 units hold the burn-in with a yield above 99.18 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with HAKOM radio interface notification administered by HAKOM, cleared for entry at Port of Rijeka on the Rijeka to Piraeus relay. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Croatia importers can hand straight to their customs broker.

Filed by Jiang Bo, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-I1 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-I1 (Custom Industrial Motherboard for Fanless and Wide-Temperature Control) as the lead SKU for Zagreb and Croatia programmes:

• Industrial HMI panel: a machine builder replaces an aging Windows panel with a fanless HMI running a Yocto image and a custom UI.
• PLC upgrade retrofit: a plant keeps the field wiring and swaps the controller for a CAN-equipped board with Modbus passthrough.
• SCADA edge node: a utility deploys DIN-rail controllers that aggregate substation data and push it over dual Gigabit links.
• Machine vision inspection: the 6 TOPS NPU runs defect classification at line speed on a 3.5-inch SBC inside the cabinet.
• Data acquisition gateway: a multi-serial variant logs sensor traffic from RS485 chains and buffers it during link loss.
• Factory automation cell: a systems integrator drives a robot cell and its safety stack from one wide-temperature board.
• Outdoor kiosk controller: an unattended terminal survives summer heat in a sealed enclosure with no fan to clog.
• Predictive maintenance: vibration and acoustic models run locally on the NPU and alarm before the PLC does.

Partnership Models for Zagreb Buyers

AndroidSBC opens the WF-C3588 to Croatia partners through three structures, and a single agreement can draw on more than one:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

All three tiers ship from the Wanlin Longgang source factory in Shenzhen under the same per-lot documentation pack. For Zagreb buyers, a typical first order on the WF-C3588-I1 is the 8GB + 32GB (WF-C3588-I1-B) configuration at MOQ 5,000 units per shipment, with standard-variant samples in 1-3 days and 15-30 days to mass production on custom runs.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: The customization scope runs across five layers: hardware (PCB, PCBA, I/O, memory, storage), thermal (fanless passive, vented, wide-temperature, conformal coating), software (custom ROM, custom Linux, pre-installed apps, OTA), branding (logo, packaging, boot animation, SKU labels), and compliance (the certification file assembled for the exact configuration you ship). Most Croatia partners change two or three layers on a standard variant rather than commissioning a full custom run.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Yes. Under NDA, AndroidSBC delivers custom Android ROM work with proprietary services and a locked launcher, custom Linux images on Ubuntu, Debian, Yocto or Buildroot, BSP ports for customer carriers, and driver development for project-specific I/O. Source access is released to the partner, and the port is performed at Longgang, which matters because a vendor BSP rarely matches a custom carrier revision on the first try.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: The NPU is fully open on the custom line. Bring the model in PyTorch, ONNX, TensorFlow or Caffe and the Longgang desk handles the RKNN quantization, the runtime integration and the validation against your board's thermal and memory profile. Custom AI algorithm integration is a standard line item on the ODM scope, and the resulting model ships embedded in the firmware image burned per lot.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: Standard-variant samples ship in 1-3 days from stock, so your engineering team can start integration while the custom scope is being quoted. A custom run follows a 15-30 day mass-production window after schematic and stack-up sign-off. MOQ is 5,000 units per shipment on standard variants; on custom configurations the MOQ is negotiable against volume commitments, and small batch orders are accepted for pilot phases. A twelve-month framework agreement with monthly lot releases brings the per-lot MOQ down further.

What certifications does a custom board need for Croatia, and who handles them?

Answer: Yes, and the file travels with the goods. The pack covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with the EMC and safety reports for your configuration, dated within the prior year. AndroidSBC confirms any Croatia-specific addition at quotation stage, which is the point where the answer is still useful rather than expensive.

How long will AndroidSBC keep supplying a custom board?

Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux firmware tracks and OTA infrastructure for pushing firmware and RKNN model updates to deployed units. Long-lifecycle programmes in industrial, signage and robotics usually ask for the term in writing, and it is written.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton labelling and pallet configuration follow FBA inbound requirements, the export declaration names the Wanlin Longgang source factory as the place of origin, and each pallet carries a per-unit barcode that traces back to the burn-in record for downstream RMAs.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: AndroidSBC targets a 0.3 percent DOA rate across the WF-C3588 line, measured over the prior twelve months. On RMA, the partner returns the faulty WF-C3588-I1 unit to Longgang with its burn-in barcode, and a replacement ships within ten business days. Because the burn-in record and the configuration file are attached per unit, the failure analysis normally comes back with a root cause rather than a credit note, which matters when a custom configuration is holding up a production line.

Contact AndroidSBC: Start Your WF-C3588-I1 Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-C3588 custom board line. Buyers in Zagreb and Croatia looking to source the WF-C3588-I1 straight from the source factory can use any of the following:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with HAKOM radio interface notification for Croatia, administered by HAKOM, entering at Port of Rijeka on the Rijeka to Piraeus relay
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

Custom board enquiries move fastest when the first message carries three things: annual volume, customization scope and Incoterm. With those in hand the export desk returns a per-lot quote and the WF-C3588 MOQ matrix inside two business days.