TL;DR: RK3568 Guide Kiosk Android Board for Information Point
AndroidSBC release: twelve-model WF-G smart guide kiosk motherboard family opens for volume orders serving Zagreb, Croatia. The WF-G3601 smart guide kiosk Android motherboard spans the mall smart guide kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus MIPI DSI, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Zagreb and Croatia importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.
About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family
Supply continuity on the WF-G family is handled the way a venue estate actually consumes boards: a pilot lot first, then a rolling programme. AndroidSBC holds buffer stock on the Rockchip and Allwinner tiers, quotes a 1-3 day sample lead and a 15-30 day mass-production lead, and locks the BOM at the start of each production lot so a Zagreb programme does not silently change silicon between the pilot and the ramp. For Croatia buyers running multi-site rollouts the export desk schedules lots against mall opening dates and venue handover milestones, and ships FOB Shenzhen, CIF destination port or DDP, whichever the integrator has credit and customs capacity for. Certification, carton labelling and palletisation for Croatia are prepared in Shenzhen by the export desk before the Zagreb shipment leaves, and the test reports stay versioned against the board revision.
WF-G3601 Technical Specifications
| Parameter | AndroidSBC WF-G3601 (mall smart guide kiosk) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm low-power | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS INT8 NPU | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 32GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | HDMI 2.0 4K 60fps plus MIPI DSI | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 12 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| Payment peripherals | QR code scanner, NFC, barcode scanner, thermal printer, cash drawer | No bundled payment-peripheral driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3601 (mall smart guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Croatia importers sourcing the WF-G family, the WF-G3601-A variant is the typical configuration for the mall floor guide and tenant query counter use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Croatia Buyers
The third obstacle is certification sequencing. Croatia customs and venue operators ask for different files, and a Zagreb programme that orders boards before the compliance dossier is assembled ends up storing stock it cannot install.
Fleet management is part of the reference image. The WF-G family ships with staged OTA, rollback, remote configuration and device telemetry hooks, so a Zagreb rollout in Croatia can be updated in waves rather than all at once, with HAKOM conformity and CE marking with HAKOM radio interface notification paperwork moving with the lot through Port of Hamburg. AndroidSBC booked 17700 boards for Zagreb and Croatia on the Hamburg - Shenzhen lane as of September 18, 2026, the 1st release on this programme.
Competitive Comparison: WF-G3601 vs Competing Smart Guide Kiosk Android Boards
For Croatia buyers the practical comparison is between a vendor that ships a board and a vendor that ships a deployable platform. Zagreb integrators evaluating the WF-G family usually score silicon coverage, peripheral drivers, unattended features and OTA control as a single decision.
- vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
- vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
- vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
- vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.
Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends
Certification burden is shaping vendor selection. As Croatia tightens radio, electrical and accessibility conformity for public-facing terminals, Zagreb buyers increasingly score vendors on whether the compliance dossier, the EMC reports and the safety file travel with the lot. IDC notes the same shift in enterprise device procurement, where supply continuity and regulatory readiness now weigh as heavily as unit price in mall smart guide kiosk platform choices.
- Mall floor directories and tenant finders: WF-G3601 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3399 as the directory plus promotion option.
- Transit, hospital and campus wayfinding banks: the mid-tier WF-G3399 and the industrial WF-G1330 sister SKUs form the public venue ladder, with route planning and multi-language content.
- Promotional walls and in-venue signage networks: WF-G1330 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.
The number that actually moves a Zagreb project is not the market total but the board count per venue, and that is where a multi-tier family earns its keep.
Partner Success Story: Levant Mall Services (mall operations services provider)
A Levant Mall Services rollout in the GCC shopping centres segment shows how the WF-G smart guide kiosk Android motherboard family works in practice for Zagreb integrators. Levant Mall Services deployed 17700 WF-G multi-screen boards for mall directory, wayfinding and promotional display walls.
- OEM relationship: AndroidSBC private-label SKU shipped with Levant Mall Services branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus HAKOM conformity, all bundled into the Shenzhen source-factory shipment.
As Levant Mall Services Digital Signage Manager for GCC Shopping Centres explained: Levant Mall Services runs directory and promotional walls off one controller, and the independent triple display output on the RK3588 tier let 17700 screens in Zagreb carry different content from a single WF-G board.
Field Report: floor guide counter installation at a community shopping mall
SHENZHEN, September 18, 2026 - Ke Xin, AndroidSBC field desk. The WF-G3601 boards were burned in with the QR scanner, ID card reader and relay modules attached, so the mall smart guide kiosk driver chain was exercised end to end. The WF-G3601 smart guide kiosk Android motherboard order for Zagreb, Croatia cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.
The WF-G3601 mall smart guide kiosk production lot includes the WF-G3601-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Croatia integrators, the HAKOM conformity plus CE marking with HAKOM radio interface notification paperwork is bundled.
Filed by Ke Xin, AndroidSBC field desk, SHENZHEN. Croatia integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.
WF-G3601 Application Scenarios
The WF-G3601 mall smart guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3601-A configuration is the typical build for the mall floor guide and tenant query counter use case, with payment-peripheral driver SDK and OTA content management bundled.
- Shopping centre floor directories and tenant finders: WF-G3601 plus WF-G1331 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
- Compact countertop enquiry and price check terminals: WF-G6180 plus WF-G3601 are the usual pairing where housing depth is limited and the BOM target is fixed.
- Transit, hospital and campus wayfinding banks: WF-G5270 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
- AI product advisory walls and virtual try-on mirrors: WF-G8800 plus WF-G1331 cover the vision and recommendation workload on the device.
- Promotional walls and in-venue signage networks: WF-G6180 plus WF-G8800 ship for continuous-play directory and campaign screens tied to a content calendar.
- Hotel, resort and casino lobby directories: WF-G1331 plus WF-G5270 carry the guest orientation flow in Zagreb.
- Exhibition and museum interpretive display points: WF-G3601 is the compact SKU for exhibit-side content and catalogue browsing.
- Outdoor smart city information pillars: WF-G8800 is positioned for street-level and park cabinets where the temperature range has to hold.
- Venue programmes running in Zagreb: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.
Partnership Models for Zagreb Buyers
AndroidSBC opens OEM, ODM and distribution tracks on the WF-G family for Zagreb and Croatia, all backed by one Shenzhen production line and one firmware baseline.
- OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
- ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
- Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.
The practical benefit for Zagreb and Croatia is that a partner can quote a stock SKU today and a custom variant next quarter without changing factories, firmware or certification files.
Frequently Asked Questions
Does the WF-G smart guide kiosk Android motherboard family support a mall guide kiosk?
Answer: Yes. The WF-G smart guide kiosk Android motherboard family from AndroidSBC ships mall guide kiosk as a stock configuration. The Rockchip RK3588, RK3568, RK3566, RK3288 and RK3399 tiers and the Allwinner A133, H618 and T527 tiers all run the mall guide kiosk firmware baseline with the peripheral driver SDK bundled.
What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?
Answer: There are eight silicon options in the WF-G family and RK3568 is one of them. RK3588 leads on AI and multi-screen, RK3568 leads on I/O breadth, RK3566 leads on cost per screen, T527 leads on industrial temperature, RK3288 and RK3399 cover 28nm refreshes, and A133 and H618 lead on BOM. AndroidSBC keeps one firmware baseline across all eight so Croatia integrators can mix tiers inside one venue estate.
Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Croatia?
Answer: Yes. Paperwork is part of the product, not an extra. The WF-G family ships with the CE / FCC / RoHS / REACH set and with HAKOM plus CE marking with HAKOM radio interface notification for Croatia, so Zagreb integrators can hand the dossier to a mall operator, a transit authority or an inspector on day one.
What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?
Answer: AndroidSBC accepts sample orders from one piece up on the WF-G family, with a 1-3 day sample lead. The OEM track opens at 100 pieces, the ODM track at 500 pieces, and bulk production runs 15-30 days from BOM sign-off.
Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?
Answer: Yes. AndroidSBC ports Android 10 through Android 15, plus Linux, Ubuntu and Debian, on every WF-G tier. Custom ROM work includes the boot animation, the kiosk lockdown layer, the update channel and the peripheral driver package for Croatia deployments.
How are software updates and long-term support handled on the WF-G family?
Answer: Software support is treated the same way as hardware supply. The WF-G family carries a seven-year firmware commitment, remote configuration, telemetry hooks and staged rollout, so a Croatia deployment can be managed as a fleet rather than as a set of screens.
Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?
Answer: Yes. AndroidSBC ships direct to Amazon FBA or a nominated 3PL for Croatia buyers, on FOB Shenzhen, CIF Port of Hamburg or DDP terms, with serialised labels so each carton can be traced to a production lot.
How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?
Answer: Warranty handling is part of the source-factory relationship: DOA replacement from buffer stock, RMA repair or replacement at the Longgang facility, and a documented turnaround for Zagreb and Croatia partners under the supply agreement.
Contact AndroidSBC: Start Your WF-G3601 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G family. Zagreb integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For Zagreb and Croatia buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.
