TL;DR: RK3568 Self-Service Query Terminal Board for Bank Branch Lobby
AndroidSBC release: twelve-model WF-K self-service query terminal motherboard family opens for volume orders serving Zagreb, Croatia. The WF-K3566 self-service query terminal Android motherboard spans the compact self-service query terminal and eleven sister models in the WF-K series, all built on the RK3566 quad-core ARM Cortex-A55 1.8GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, single 1080p output plus LVDS, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Zagreb and Croatia importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.
About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family
AndroidSBC is the export arm of Wanlin Manufacturing Group. Its WF-K series addresses the self-service query terminal segment with twelve boards on eight chips, all produced in the Longgang source factory in Shenzhen. Zagreb and Croatia buyers typically start from one pilot model and then scale the same board across a wider estate. Every model is validated on the same burn-in rig in Longgang before it is packed for Croatia, and the same rig logs are available on request.
WF-K3566 Technical Specifications
| Parameter | AndroidSBC WF-K3566 (compact self-service query terminal) | Industry Average |
|---|---|---|
| Processor | RK3566 quad-core ARM Cortex-A55 1.8GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 0.8 TOPS | No NPU on competing entry boards |
| Memory | 2GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 16GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | single 1080p output plus LVDS | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 11 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 5 plus Bluetooth 5.0 plus Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| Query peripherals | Capacitive touch, thermal printer, document scanner, card reader | No bundled touch, printer or scanner driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K3566 (compact self-service query terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Croatia importers sourcing the WF-K family, the WF-K3566-A variant is the typical configuration for the compact clinic and pharmacy query rollout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Self-Service Query Terminal Android Motherboards for Croatia Buyers
The hard part of a query terminal project in Croatia is rarely the processor. It is keeping the touch controller, the printer firmware and the peripheral interfaces on one qualified baseline while Zagreb rolls the same board across very different sites.
Public-sector tenders in Zagreb now ask for the compliance chain up front. The CE marking with HAKOM radio interface notification route used in Croatia has to be traceable from the board label back to the test house, which is a sourcing criterion rather than a formality. That is why AndroidSBC dates the Zagreb batch at 17900 units per release and holds the Hamburg - Shenzhen lane capacity for Croatia across the year.
Competitive Comparison: WF-K3566 vs Competing Self-Service Query Terminal Android Boards
A Zagreb buyer comparing query boards for Croatia should read the last three rows first: peripherals, temperature range and what is bundled, not billed separately.
- Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
- Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.
Global Self-Service Query Terminal / Information Kiosk Market Trends
The self-service query market sits inside the broader kiosk expansion, but it behaves differently: replacement cycles are longer and the peripheral stack matters more. Croatia buyers in Zagreb therefore tend to standardise on one board family rather than mixing vendors per site.
- Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K3566 and WF-K1331 tiers ship in board form with the enclosure left to the local partner.
- Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K1331 and WF-K6180 configurations address that pattern directly.
- Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K6180 over boards that re-spin silicon between lots.
In Croatia the winners so far are the integrators who standardised early on one query board family, which is the pattern AndroidSBC sees across Zagreb accounts.
Partner Success Story: Levant Access Services (government service hall contractor)
A Levant Access Services rollout in the GCC public service segment shows how the WF-K self-service query terminal family works in practice for Zagreb integrators. Levant Access Services commissioned 17900 query terminals in government service halls.
- OEM relationship: AndroidSBC private-label SKU shipped with Levant Access Services branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus HAKOM conformity, all bundled into the Shenzhen source-factory shipment.
As Levant Access Services Project Director for GCC Public Service explained: Levant Access Services required Arabic UI support and hall information screens from one platform, and the 17900 WF-K units commissioned in Zagreb run both roles on the same firmware.
Field Report: compact query terminal rollout at a retail pharmacy chain
SHENZHEN, September 22, 2026 - Liang Shu, AndroidSBC field desk. The WF-K3566 run shipped with the compact self-service query terminal profile pre-flashed, which shortens the commissioning step for Croatia integrators. The WF-K3566 self-service query terminal Android motherboard order for Zagreb, Croatia cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.
The WF-K3566 compact self-service query terminal production lot includes the WF-K3566-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For Croatia integrators, the HAKOM conformity plus CE marking with HAKOM radio interface notification paperwork is bundled.
Filed by Liang Shu, AndroidSBC field desk, SHENZHEN. Croatia integrators typically request CE plus local radio interface notification for self-service query terminal board deployments.
WF-K3566 Application Scenarios
The WF-K3566 compact self-service query terminal sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K3566-A configuration is the typical build for the compact clinic and pharmacy query rollout use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.
- Hospital and clinic information points: the WF-K3566 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Zagreb.
- Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
- Government service halls: the WF-K5270 runs tax, social security and real estate information lookup, with printing available on the same board.
- Shopping mall directories: the WF-K8800 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
- Airport and train station concourses: high-brightness information query where the WF-K8801 has to stay readable under strong ambient light.
- Retail and pharmacy price or product lookup: compact stations where the WF-K3600 fits a narrow counter without structural work.
- Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
- Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
- Retrofit programmes in Zagreb: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.
Partnership Models for Zagreb Buyers
For Croatia buyers the working models are three: a distribution track, an integration track and a private-label track, all open to Zagreb teams.
- Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
For a first Croatia order, Zagreb integrators typically begin on the distribution track with a single model, then widen to the full twelve-model WF-K range once field data is in hand.
Frequently Asked Questions
Does the WF-K self-service query terminal Android motherboard family support a compact self-service query terminal?
Answer: Yes. The compact self-service query terminal is a stock configuration on the WF-K self-service query terminal Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build and the same peripheral interface before shipment to Zagreb.
What is the real difference between the RK3566 tier and the other silicon tiers in the WF-K family?
Answer: The RK3566 tier is the right choice when the Zagreb deployment needs exactly its level of video decode and AI capability; above that the extra headroom is paid for but not used, and below it the board cannot sustain the workload.
Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Croatia?
Answer: Yes, and where Croatia requires a local registration step AndroidSBC supplies the technical file that the Zagreb partner submits, rather than leaving the integrator to reconstruct it.
What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?
Answer: AndroidSBC sets a pilot-friendly MOQ on the WF-K family. Sample units reach Zagreb in 1-3 days, and a first bulk lot for Croatia runs 15-30 days from confirmation.
Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?
Answer: Yes. The WF-K baseline is Android, but Croatia buyers frequently need a custom Linux image or a stripped Android build, and AndroidSBC delivers both from the Longgang engineering team for Zagreb.
How are software updates and long-term support handled on the WF-K family?
Answer: AndroidSBC supports field updates by staged OTA with rollback, plus local update packages where a Zagreb integrator needs to service Croatia sites without network access.
Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?
Answer: Yes, and this is a standard route for Zagreb sellers. AndroidSBC prepares FBA-compliant cartons and labels for Croatia warehouses as part of the shipment rather than as a separate service.
How are RMA and DOA replacements handled on the WF-K self-service query terminal family?
Answer: AndroidSBC logs every board to its burn-in result, which is what makes RMA workable for Zagreb integrators running Croatia estates across many sites.
Contact AndroidSBC: Start Your WF-K3566 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-K family. Zagreb integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For Zagreb and Croatia buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.
