TL;DR: POS Motherboard 16GB LPDDR5 for Pharmacy Counter
AndroidSBC peripheral desk: printer, scanner, cash drawer and payment reader driver SDK declared production-ready serving Zagreb, Croatia. The WF-P3600 POS Android motherboard spans the dual-screen cash register with printer and cash drawer and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, dual LVDS output at 1080p plus 60Hz, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Zagreb and Croatia importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
The WF-P family from AndroidSBC, a Wanlin Manufacturing Group export brand, covers eight silicon tiers from the Rockchip RK3576 octa-core platform down to the Allwinner A133 entry tier. For Zagreb buyers the practical consequence is simple: one driver contract, one mounting pattern and one firmware baseline across every lane of a rollout, whether the lane is a supermarket checkout, a restaurant counter or an unattended forecourt cabinet. Each production lot is burned in for 72 hours with the display, the touch panel and the printer loop running, and the serial number is logged against the test record so a Zagreb partner can trace a single board back to its run.
WF-P3600 Technical Specifications
| Parameter | AndroidSBC WF-P3600 (dual-screen cash register with printer and cash drawer) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 32GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | dual LVDS output at 1080p plus 60Hz | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 12 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3600 (dual-screen cash register with printer and cash drawer) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Croatia importers sourcing the WF-P family, the WF-P3600-A variant is the typical configuration for the restaurant counter cash register rollout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Croatia Buyers
Dual-screen POS is where most competing boards fail quietly. They list two display interfaces, but the second lane is a mirror rather than an independent framebuffer, so the customer display cannot carry a separate promotion loop.
For payment certification AndroidSBC supplies the evidence pack rather than an opinion: the board-level security description, the trusted execution description where the tier supports it, and the HAKOM route applied in Croatia as a documented path the Zagreb acquirer can audit. AndroidSBC logged the 1st shipment to Zagreb on September 23, 2026 - 68900 boards on the Hamburg - Shenzhen lane, each serialised against its burn-in record and each carrying the same firmware baseline.
Competitive Comparison: WF-P3600 vs Competing POS Android Boards
The comparison below is the one Zagreb buyers run when they shortlist three Chinese factories, and it is where the WF-P family separates from the field.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
Unattended and self-service formats are the segment where the board specification bites hardest. A cabinet on a forecourt or in a store entrance has no staff to reset it, so the dual-screen cash register with printer and cash drawer has to hold a watchdog, an RTC and a clean auto-recovery path.
- Entry counter tier: WF-P3600 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P3602 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P3566 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
For Zagreb partners the commercial conclusion is that the board vendor has to be a factory. A trading company cannot hold a BOM across a three-year refresh.
Partner Success Story: Levant Checkout Services (forecourt payment integrator)
The Levant Checkout Services rollout in the GCC fuel and convenience segment shows how the WF-P family from AndroidSBC supports Zagreb integrators. Levant Checkout Services rolled out 68900 WF-P boards across 58 forecourt payment cabinets.
- OEM relationship: AndroidSBC private-label SKU shipped with Levant Checkout Services branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus HAKOM conformity, all bundled into the Shenzhen source-factory shipment.
In the words of Levant Checkout Services Project Director for GCC Fuel and Convenience: Levant Checkout Services runs unattended forecourt cabinets on the industrial WF-P tier, and 68900 units hold a 24-hour duty cycle across the Zagreb network.
Field Report: restaurant counter cash register rollout
SHENZHEN, September 23, 2026 - Jian Guo, AndroidSBC field desk. The WF-P3600 board designated for the dual-screen cash register with printer and cash drawer application was pulled from the same production lot as the pilot batch, so the Croatia team received an identical configuration. The WF-P3600 POS Android motherboard order for Zagreb, Croatia cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.
The WF-P3600 dual-screen cash register with printer and cash drawer production lot includes the WF-P3600-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Croatia integrators, the HAKOM conformity plus CE marking with HAKOM radio interface notification paperwork is bundled.
Filed by Jian Guo, AndroidSBC field desk, SHENZHEN. Croatia integrators typically request CE plus local radio interface notification for POS board deployments.
WF-P3600 Application Scenarios
The WF-P3600 dual-screen cash register with printer and cash drawer sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3600-A configuration is the typical build for the restaurant counter cash register rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P3600 drives the cashier screen while the second lane carries the customer display or the promotion wall in Zagreb.
- Convenience and small format stores: the WF-P3601 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P3602 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P3566 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P3288 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Zagreb: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Zagreb Buyers
Because the WF-P family is built at the Longgang source factory, all three tracks below come with the same frozen BOM and the same seven-year firmware window.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
For Zagreb buyers the practical difference between the tracks is who holds the stock and whose name is on the carton, not what is inside the carton.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a dual-screen cash register with printer and cash drawer?
Answer: Yes - dual-screen cash register with printer and cash drawer is supported across the WF-P line, and the Zagreb configuration is locked as the reference for later lots so re-orders behave identically.
Which silicon tiers are available in the WF-P family for Croatia buyers?
Answer: Eight silicon tiers are offered, and the RK3568 platform sits in the middle of the range. Each tier carries the same peripheral interface contract, so a Zagreb partner can move between them without re-writing drivers.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: It can. The WF-P family is specified so one board carries the full counter harness: printer, scanner, drawer, customer display and payment reader, with no expansion card required.
What is the minimum order quantity and the sample lead time for Croatia?
Answer: Sample lead is 1-3 days and mass production is 15-30 days. MOQ depends on the track - distribution partners work from the price list, private-label SKUs are agreed per configuration.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. The engineering desk handles custom ROM, boot branding, pre-installed apps, BSP porting and SDK modules, and the Zagreb partner keeps the same image across re-orders.
How are firmware updates delivered to a Croatia estate after deployment?
Answer: The OTA channel is staged and reversible. A Zagreb chain pushes to a pilot group first, and if a printer or drawer regression appears the image rolls back to the previous build.
What shipping terms does AndroidSBC support for Croatia orders?
Answer: The export desk quotes FOB Shenzhen, CIF and EXW, handles customs clearance, and ships globally. The Zagreb partner picks the term and AndroidSBC books the lane.
What happens if a board fails in the field in Croatia?
Answer: Failures are handled against the serialised test record. AndroidSBC traces the unit to its lot, confirms the BOM, and ships a replacement from the Zagreb call-off stock or the next production slot.
Contact AndroidSBC: Start Your WF-P3600 Sourcing Conversation
Zagreb integrators can reach the AndroidSBC export desk for the WF-P POS board family through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Croatia buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-P family.
