TL;DR: Smart Parcel Locker Board for Advertising Player
AndroidSBC supply desk: LPDDR4 and eMMC allocations locked for the X9 board family serving Zagreb, Croatia. The WF-X9-05 X9 Android motherboard spans the infrared touch all-in-one for interactive kiosks and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, LVDS output at 1080p with 10-point infrared touch, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to Zagreb and Croatia importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.
About AndroidSBC and the X9 Android Motherboard Family
The twelve X9 configurations share one interface contract. A Croatia distributor who starts on the 1GB plus 8GB LVDS tier for a shopfront player can step up to the 2GB plus 32GB tier with 4G for a connected network without changing the mounting pattern, the touch controller or the OTA workflow. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for Croatia, bundled with the lot so the importer clears customs without a second round of test reports.
WF-X9-05 Technical Specifications
| Parameter | AndroidSBC WF-X9-05 (infrared touch all-in-one for interactive kiosks) | Industry Average |
|---|---|---|
| Processor | A133 quad-core ARM Cortex-A53 1.6GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | PowerVR GE8300 | Older Mali-400 or basic 2D GPU |
| Memory | 2GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 16GB eMMC | NAND flash 4GB or 8GB on competing boards |
| Display output | LVDS output at 1080p with 10-point infrared touch | Single HDMI 1080p output only |
| Touch support | 10-point infrared touch | Resistive single-touch requiring calibration |
| Video decode | 4K H.265 or H.264 at 30fps plus 1080p multi-format | 1080p decode ceiling on competing boards |
| Operating system | Android 10 | Android 7 or Android 8 on competing boards |
| Interfaces | 4 USB including USB0 OTG, 2 serial ports selectable RS232 or TTL, I2C, GPIO, IR, SPK, TF | 2 USB and one fixed-level serial port |
| Power and environment | 12V DC input with 100mV ripple, 300mA typical board draw, 3.3V 800mA plus 5V 2A plus 12V 2A peripheral budget | 5V only input with no documented peripheral budget |
| Operating temperature | -20C to 70C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-05 (infrared touch all-in-one for interactive kiosks) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Croatia importers sourcing the X9 family, the WF-X9-05-A variant is the typical configuration for the interactive kiosk rollout use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing X9 Android Motherboards for Croatia Buyers
Commercial screens punish hardware in a way that office equipment never does. Sunlight behind a shop window, a sealed enclosure with no airflow, a mains supply that dips every afternoon and a 7x24 playback duty - the Croatia rollout fails on those details long before it fails on CPU benchmarks.
For Zagreb integrators worried about the trading-company risk, AndroidSBC ships from the same building the boards are built in. The source factory address is on the packing list, the test record carries a serial number, and the CE marking with HAKOM radio interface notification route used in Croatia is issued against that factory. The Zagreb rollout passed its qualification gate on September 24, 2026, and 132100 boards were released into production the same week for the Hamburg - Shenzhen lane, with the sample and the volume lot built from the same component batch.
Competitive Comparison: WF-X9-05 vs Competing Commercial Display Android Boards
Competing boards reaching Zagreb usually win on unit price and lose on everything that happens after the first container. The four points below are where that shows up.
- Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so Zagreb integrators mount a locally sourced screen without a calibration pass.
- Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to Zagreb usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Zagreb integrator to obtain.
- Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Zagreb.
Global Digital Signage and Commercial Display Market Trends
Asia Pacific leads by value and posts the highest regional growth rate, while North America and Europe follow on replacement demand. For Zagreb buyers the practical reading is that the same board family has to serve a high-brightness shopfront screen and a small indoor wayfinding panel.
- Entry playback tier: WF-X9-05 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
- Interactive mainstream tier: WF-X9-06 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
- Connected and unattended tier: WF-X9-07 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.
AndroidSBC reads the Croatia cycle as a firmware problem as much as a hardware one, which is why the seven-year update window is written into the X9 family rather than offered as an option.
Partner Success Story: Levant Screen Services (outdoor digital out of home integrator)
A Levant Screen Services programme in the GCC outdoor advertising segment illustrates how the X9 family from AndroidSBC supports Zagreb integrators on the ground. Levant Screen Services rolled out 132100 X9 boards across 58 outdoor advertising cabinets.
- OEM relationship: AndroidSBC private-label SKU shipped with Levant Screen Services branding and CE / FCC / RoHS files bundled.
- Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
- Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus HAKOM conformity, all bundled into the Shenzhen source-factory shipment.
Levant Screen Services Project Director for GCC Outdoor Advertising highlighted: Levant Screen Services runs unattended street cabinets on the wide-temperature X9 tier, and 132100 units hold a 24-hour duty cycle across the Zagreb network.
Field Report: interactive kiosk rollout at a municipal service point
LONGGANG, September 24, 2026 - Deng Hui, AndroidSBC field desk. The WF-X9-05 held its panel drive through the full 72-hour soak, with the backlight current measured against the documented 12V lane budget. The WF-X9-05 X9 Android motherboard order for Zagreb, Croatia cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.
The WF-X9-05 infrared touch all-in-one for interactive kiosks production lot includes the WF-X9-05-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For Croatia integrators, the HAKOM conformity plus CE marking with HAKOM radio interface notification paperwork is bundled.
Filed by Deng Hui, AndroidSBC field desk, LONGGANG. Croatia integrators typically request CE plus local radio interface notification for X9 commercial display board deployments.
WF-X9-05 Application Scenarios
The WF-X9-05 infrared touch all-in-one for interactive kiosks sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-05-A configuration is the typical build for the interactive kiosk rollout use case, with panel driver, touch HID configuration and staged OTA management bundled.
- Advertising machine and digital signage: the WF-X9-05 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
- Interactive query and wayfinding: the WF-X9-08 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
- Smart retail terminal and vending: the WF-X9-09 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
- Parcel locker and fresh food cabinet: the WF-X9-10 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
- Face recognition access control: the WF-X9-11 takes the camera input and the door controller wiring on the same board.
- Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
- Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
- Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
- Retrofit programmes in Zagreb: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.
Partnership Models for Zagreb Buyers
AndroidSBC runs three commercial tracks on the X9 family, and Zagreb partners usually start on one and move to another as volume builds.
- Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.
The Zagreb partner keeps the commercial relationship; AndroidSBC keeps the factory discipline. That division is what makes the tracks work at volume.
Frequently Asked Questions
Does the X9 Android motherboard family support an infrared touch all-in-one for interactive kiosks?
Answer: Supported. The infrared touch all-in-one for interactive kiosks is part of the standard X9 configuration set, and the board ships to Zagreb with the panel files and the firmware baseline already matched.
Which configurations are available in the X9 family for Croatia buyers?
Answer: The family covers entry playback, interactive touch, connected 4G and wide-temperature industrial configurations. The board in this specification is supported for seven years from release.
Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?
Answer: One board handles panel, touch and peripherals. The driver package ships in the carton covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC, RFID, ID card reader and fingerprint reader.
What is the minimum order quantity and the sample lead time for Croatia?
Answer: Samples ship in 1-3 days and the sample MOQ is a single board. Volume production runs on a 15-30 day lead against the frame agreement, and the price list covers tiered volume breaks.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes - custom ROM, boot logo, boot animation, pre-installed applications and UI work are all available, and the customised image becomes the reference build for later lots.
How are firmware updates delivered to a Croatia screen estate after deployment?
Answer: Staged OTA with rollback ships with the board. The Croatia partner controls the wave size and the timing, and the watchdog recovers a screen that fails mid-update.
What shipping terms does AndroidSBC support for Croatia orders?
Answer: FOB Shenzhen, CIF and EXW terms are all supported, with export customs clearance handled at the factory. The Zagreb partner chooses the Incoterm that matches its broker arrangement.
What happens if a board fails in the field in Croatia?
Answer: Every unit is serialised against its test record. A Croatia field failure is traced, the root cause is confirmed on the bench at Longgang, and the replacement ships against the frozen bill of materials.
Contact AndroidSBC: Start Your WF-X9-05 Sourcing Conversation
For the X9 Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Zagreb integrators:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Zagreb and Croatia buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the X9 family.
